Showing posts with label to. Show all posts
Showing posts with label to. Show all posts

Wednesday, March 5, 2014

How To Build A Chicken Coop Easily In One Weekend

By [http://ezinearticles.com/?expert=Andrew_Alford]Andrew Alford
Building Your Own Chicken Coop Can Be a Very Smart Decision
If youve made the decision to build your own chicken coop youre a part of a growing group of Americans who are saying "No" to economic downturns, and doing something positive for themselves, their family and their own nutrition. Raising chickens and harvesting your own eggs dates back to earlier simpler times, but its something that almost any do-it-yourselfer can do if they put their mind to it.
STEP ONE: The first step in building your own chicken coop is to study the procedures, which is what this article is about, and while it may not be comprehensive it should serve as a good starting point. By doing your homework, youll understand more about the breed and number of chickens youll need to satisfy your needs, as well as the chickens tolerances to temperature and environment.
STEP TWO: Be certain to check the zoning laws in your community, this will tell you the number of chickens you can have, whether a rooster is permitted, and whether youll need an inspector to sign off on your finished coop. Unless youre located far from any city and have ample acreage, zoning laws may be applicable, and its best to find out before you are forced to dissemble your creation.
STEP THREE: Next comes the design, choose a design that is not only aesthetically pleasing for you (and possibly your wife or significant other) but also functional for your chickens. There are multiple designs online as well as detailed books about choosing and constructing your chicken coop. Basically, youll want to design a chicken coop that is roofed, well ventilated and has ample space. Of course youll need to have nesting boxes and roosts allowing your chickens to nest and sleep, exercise, and other assorted chicken like activities.
STEP FOUR: How much space do you estimate youll need? Step four is very much part of the planning phase, and will depend on the breed and the number of hens you plan to house. Packing too many chickens into a small space is a recipe for disaster; theyll need space to move around, nest, peck the ground and of course lay their eggs, etc. While this recommended space will vary depending on the breed, approximately 4 sq. ft. per chicken has proved ample for my needs.
STEP FIVE: What is the climate in your area? While its not necessary to have an air-conditioned chicken coop, there is an optimal climate for a particular breed, and this will need to be considered prior to building and purchasing your chickens. If you live in a cold climate, youll need to ensure the inside not only has suitable ventilation, but also heating and insulation if required; this might include a heat lamp for young chickens, and/or a heating pad for your hens.
While chickens for the most part are easy to maintain, youll need to keep a watchful eye, and potentially make changes to their environment as the seasons change. Plan on supplying electrical power to your chicken coop to run the necessary heating, cooling, or monitoring devices you may require.
Once youve given adequate thought and planning to your new chicken coop, its time to set aside a weekend accomplish the task. Once your chicken coop is up and functional, and your hands used to their environment, youll soon be enjoying fresh eggs for breakfast, and possibly answers to share with family and friends.
Did you know the average American spends over $400 trying to build their chicken coop. It can take may of them 2 months or more to come up with something that quite honestly can be less than adequate for raising healthy chickens.
You may also be surprised to know that most people who decide to [http://buildanewchickencoop.com]build a chicken coop rush in to it totally blind and without any prior planning.
Andrew Alford has been building chicken coops for many years and it you want to save time and more importantly MONEY then learn [http://buildanewchickencoop.com/how-to-build-a-chicken-coop/]How To build a chicken coop the right way first time.
Article Source: [http://EzineArticles.com/?How-To-Build-A-Chicken-Coop-Easily-In-One-Weekend&id=6708266] How To Build A Chicken Coop Easily In One Weekend
Read More..

Monday, March 3, 2014

Mammoth Kauri wood What to do with it

Some of you may know Bob, AKA TopamaxSurvivor at Lumberjocks. Well, he recently won a drawing at Charles Neils web site and asked Woodcraft to just send the gift to me. Did any of that make sense?

At any rate, I received Bobs prize yesterday. Get this: its a chunk of Mammoth Kauri wood. Never heard of Mammoth Kauri? Well, read all about it here.


So heres the deal. Its ancient wood from New Zealand whose trees were knocked down by a tsunami and left buried in peat bogs, thereby preserving them through the millennia. The piece I have is carbon dated at between 30,000 and 50,000 years old. Here they are retrieving these ice-age trees:


So I was thinking about drilling a hole in it, painting it neon pink and using it as a candle holder.

HA! But seriously, do any of you have any suggestions? Im afraid to get it anywhere near a saw blade until I have a solid plan in mind. Its 2" thick x 6" square. (Half a board-foot?) What would YOU do with a small, but special piece of lumber? Any ideas? I want to do it justice. Ive been tossing around an idea for a small accent lamp. Mainly I just want to show off the wood as much as possible.
Read More..

Monday, February 24, 2014

FOUR LETTER WORDS THE SECRET TO AN AMAZING CHRISTMAS BED


 

 
My four letter word is *SNOW*. What would your four letter word be?
Careful now we are talk about Christmas!
For this decorating project I printed out letters on regular white paper, cut them out, and taped
 them in place on my window. The snow flakes are tree ornaments also secured with tape. You can do
 this on most any window or mirror and you just have to think of how many letters you want your
 word to have and think of all the Christmas words available to you ...
 JOY - ELF - TOY - NOEL - STAR - DEER -SNOW - MERRY - SANTA - PEACE - FAMILY
 and so on.

 
 
 
 
Now for my easy Christmas bedding tip ...
 
 What I have done is buy an inexpensive red plaid sheet set and paired it with my white bedding.
A sheet set usually comes with pillow cases, a flat sheet, and fitted sheet. This is more than enough
red and plaid to set the holiday mood in the bedroom without buying a new comforter or cover.
You can either have a large fold over of the flat sheet or you can use it to cover everything.
Ive also added a warm knitted throw at the foot and this can all be used long after Christmas.
Try to avoid spending money on bedding that is exclusively Christmas themed.

 
********************************************
 
Here is a peak at where I store my Christmas stuff, its a storage box spring under my bed.
Years ago I was about to get rid of my box spring all together until I found this option.
My Christmas decorating has been stored in there ever since.
 
 
*************************************************
 
And I have added some new mirrors to the Accessories page:
http://blogspot.ca/p/mirror-for-sale.html
  
 
 
This large ornate one would be great just about anywhere in your home.
And below I have 2 of these vintage tall wood mirrors.
Maybe use both in a hall way or just one for a dressing mirror.

 
 
The Chair is NSF.

 
 

Read More..

Tuesday, February 18, 2014

1 How To Learn Woodworking Skills Woodworking Plans

How To Learn Woodworking Skills

Woodworking Plans

Do-it-Yourself Patterns and Crafts, Woodworking kits, Furniture Plans Plus Much, Much More. Will Show You How to Make 16,000 Different Woodworking Plans. Use The Plans For Fun, Functionality or Profit!

How To Learn Woodworking Skills. Wood is one of the most wonderful, sturdy and versatile supplies that you can function with although on a do it yourself project. The beauty of a cabinet door that is completed in wood cant be matched by any other material regardless of whether organic or man created. As with any project, you would demand a detailed set of plans whilst you work with wood and wood based supplies. This is why it is advisable that you use a detailed set of woodworking plans when you program to extensively use wood based materials to total the project that you have embarked on.

Now let us examine why woodworking plans are essential in any wood primarily based do it your self project. To start with, these plans help you remove waste. If you begin a woodworking project with out a firm program, the probabilities are that you would finish up working with extra wood that you originally intended to. Most of the wood primarily based projects would demand substantial assemblies and sub assemblies.

When you begin your project, you would be ideally working with person members of wood and finishing them individually just before assembling them. If you do not have the proper woodwork plans, you could end up with mismatching wood members at the time of assembly. This could cause highly-priced price and time overruns in the project. All these issues can be avoided by utilizing a well laid out set of wood plans.

The other advantage that you could have if you use woodworking plans are that you would be prepared with all the tools and implements that you would call for for completing the wood primarily based project. Often we discover that we do not have access to a specific tool in the middle of a woodworking project. This circumstance could lead to a loss of time and from time to time you may even have to abandon the project in case a distinct tool is not out there. All these issues can be avoided if you have a detailed strategy at the onset. How To Learn Woodworking Skills




How To Learn Woodworking Skills Observation

Constant Advertising - The romance of woodworking will have to have to be balanced with the consistent advertising and marketing crucial to retain the operate coming in. In time, phrase of mouth brings in a lot of operate if you develop a good popularity. Until finally then, you will need to get the phrase out routinely. After the function arrives in you have to have fantastic manufacturing systems so you can complete the tasks promptly and continue to hold the money flowing. If jobs take into consideration also pretty extended and the dollars movement stops, it can turn into tricky to shell out the costs. Speaking of cash flow, you ought to create and adhere to normal assortment tactics. This is 1 region exactly where by a number of woodworkers fail. The payment for the perform will want to be as significant as the execute by itself. If you are lax in accumulating, you will run into prospects who fall brief to shell out you and this will result in seriously critical revenue movement challenges.

The Modest small business - Even nevertheless you like woodworking, you will require to do the household company if you are to make a dwelling at it. Excellent final results usually demands an in-depth data of each woodworking and small business management. If you in no choice have every single, I suggest you hesitate to leap in till you have honed your enterprise expertise.

Looking back once more I recognize that my lack of information in the course of my startup really a few decades back could have been offset with some prevalent details and yet another individual to advise me.Sadly I had to understand most components by trial and error.

Just about each and each and every and each and every week, I take the time to go via the comments that my viewers make about my woodworking web site. 1st of all I want to them for taking the time to comment, I unquestionably value all of the comments and tips. This prior week there was a comment from a gentleman, who expressed a want to get into woodworking. As a man who is passionate about woodworking, I want to welcome him to the fold. And I want to supply you him all of the ideas and encouragement probable in his endeavors.How To Learn Woodworking Skills


How To Learn Woodworking Skills Clip :



Tag : How To Fix How To Learn Woodworking Skills, How To Quit How To Learn Woodworking Skills, Get The Best Price For How To Learn Woodworking Skills, Where To Buy How To Learn Woodworking Skills, Where To Purchase How To Learn Woodworking Skills.

How To Learn Woodworking Skills Reviewed by Todd White on Rating: 4
Read More..

Monday, February 10, 2014

The Ply Wooden Boat Part IV Shes Got To Float

With the keel finished, construction of the boat was done and it was time to waterproof. When Eric made his plywood boat on GardenFork.tv, he used liberal amounts of silicone caulking as waterproofing. As a professional roofer and waterproofer, this made me cringe. Contrary to popular marketing, silicone is not the be-all and end-all of caulking. When compared to commercially available urethane and moisture curing polyether sealants, silicone is crap for most applications. I used the best caulking Ive ever used, M-1, between the plywood panels & the battens. Then I sealed all of the exterior joints and the screw heads with the new M-1 Marine.
A little M-1 sealant here, a little M-1 sealant there . . .

Chem Link was kind enough to send me some M-1 Marine to try out. Its designed for applications in consistently damp marine environments. It can even be used in underwater applications (post curing). In application, the M-1 marine was just as easy to tool as standard M-1. While I cant describe my boat as consistently damp, the M-1 marine did an excellent job of sealing the joints and screws.
M-1 Marine is very good sealant.
At this point, with the boat constructed and the joints sealed, many would have called it done, put on a decorative coat of paint if desired and set out to sea.

Alas, I am the few (not the many) and knowing what I do about waterproofing and having access to the waterproofing products that I do, I had to seal the boat more. Once the M-1 Marine was dry, I then coated the entire outside of the hull with BARR waterproofing, also by Chem Link.
The now empty original tube and new bucket filled with BARR.
BARR is a liquid waterproofing. It comes it what look like giant toothpaste tubes. To apply it, I squeezed the tubes out into a plastic cup and used a cheap, disposable paint brush. First I put a coat of BARR over the joints. Then I covered the entire exterior hull with BARR, right up to the underside of the batten.
The joints coated and beginning on the bow.
Once the boat was coated, I allowed the BARR to dry overnight before dropping it in the lake.
A close up of the stern and keel after being coated with BARR.
The finished boat, ready for the lake.
Coming up in Part V, well take here out on the open lake.

For more about the (Ply)Wooden boat, read these posts.
Read More..

Thursday, January 23, 2014

Back to Love Spoons De volta às Love Spoons

Esta semana , talvez pelas boas criticas acerca dos meus trabalhos nas Love spoons, resolvi esculpir mais umas peças, trabalhos realizados em madeira de Tilia, Amieiro, Cedro, Pinho e Pau ferro, o resultado final foi este,

This week, perhaps for good reviews about my work in Love spoons, I decided to carve a few more pieces, works made ​​in wood of lime, alder, cedar, pine, the end result was this,









Read More..

80s Chandelier to Glass Mirror How To

Friday I finished my DIY glass pane mirror and I am in love with the finished result!


Like I mentioned on Friday, we decided to hang it in the guest room above the desk (from the master bedroom) and moved the coral dresser next to the closet (I plan to also turn this into my sewing/diy room)

Heres how we did it ... (with a few tweaks of what I wish we would of done to make it faster)



We took apart this 80s chandelier (in EVERY thrift shop) and removed all the metal from the slanted glass panes.

Our chandelier had 16 (7.25” long and 5.75” at the widest point) slanted glass panes - we used 15. The finished mirror was 28.75” in diameter with 1/4" spacing between the panes.

After gathering our supplies:

1/2 sheet of 3/8" plywood (Ace Hardware lets you buy 1/2 a sheet)
Paint
Weldbond glue
Jewelry wire
Melamine edging
15" round mirror
Grout
Rub n Buff

We laid out the glass panes in a circle on a piece of plywood slightly larger - since our panes wouldnt work without a gap, we gradually adjusted until the spacing was equal (about 1/4" between each)


Once all the panes were equal, we marked all of the corners and outer edges so that we could easily line it back up and for the outer cut.

 
We painted the panes before this step, but I wish I would of done it after, since moving them around removed some of the paint, and touch ups were needed.

After the panes were marked, David cut out the plywood back following our outer pencil marks with the jigsaw and then sanded the edges.




Now onto the pretty stuff! 


We used an airbrush (we have this one), since we wanted to use the same paint that we used on the chandelier - BM Bali - Spray painting would work great too! (prior to painting, make sure to tape off the front to avoid over spray)

Next, our mirror selection ... 

We ended up getting a 15" round 1/8" thick mirror cut at a local glass shop to slightly overlap the glass panes since getting it cut to meet the 15 angles created by the glass panes would be hard to get precise, and very costly!

Instead, David cut 1/8" pieces (any shape will work since it is covered) of lauane with the chop saw (slightly smaller than the panel) to glue to the back of the glass so that the glass panels would fit just over the mirror and be flat, rather than tilted (tip: ask for a scrap piece of 1/8" board, we got ours for a whopping .25 from Ace Hardware)


These were glued on the back of the painted glass panel with Weldbond glue - our paint looked discolored for about 24 hrs until it fully dried, but then evened out perfectly!


I glued the mirror with Weldbond glue to the plywood (using the pencil marks that I created earlier to center it)


Then I laid the panels out, applied Weldbond glue to the back side and allowed to a few hours so that they were firmly in place (tip: place heavy objects on the glass to hold it down while drying, I used a few books).

After it dried, I applied grout (like you would tile), but instead I would recommend putting the frame first to avoid redoing work like I did :)


I used rectangular jewelry wire to build the frame for the inside (it was slightly taller than the glass panels) First I laid out the overall shape by bending in the creases and then applied a super glue to secure it (note: to smooth out the wire as you go use something firm - I used a wood putty knife to straighten it by gently pressing against the pane to get it even. I also used tape after the glue was applied to hold in place until dry)


I would of preferred a similar metal strip for the outside, but since I couldnt find one wide enough (and flexible enough) at a local store, I purchased melamine edging, for the outer edge. Mine was too wide so I cut it to the correct width with a ruler and xacto knife. I glued it with the Weldbond glue, but wood glue would of worked fine too. I also used tape to hold it in place while it dried.

Once the outer edges are dry, its time to grout!


Apply the grout as you would to tile, make sure to fill in all of the crevices!


Once the grout is dry, I taped off the glass and mirror and then applied Rub n Buff (I used Antique Gold) over the grout and the trim and then wiped away any exces.

After removing the tape, we used D rings and heavy gauge wire on the back to hang it, since the mirror is very heavy we also applied a little Gorilla Glue in the screw holes for added strength and wire rated for 100 lbs (just to be safe) We then used a drywall anchor like this for the wall that could handle the weight (always look for a stud if possible!)

I did all the finishing touches bent over the floor, I wish I would of used a lazy susan turn table on the table (would of made it much easier!)

and thats it! The mirror ended up at 28.75" in diameter. The perfect size for above the desk in the guest room!






Cost Breakdown and Sources:

Chandelier (already purchased for the drum shade chandelier)
Paint BM Bali (already purchased for drum shade chandelier)
Rub n Buff (already purchased at Michaels)
15" round mirror ------------------- $14 (local glass shop)
Brass Jewelry wire ---------------- $3 (with 50% coupon at Michaels)
Melamine Edging ----------------- $5 (Home Depot)
1/2 sheet 3/8" plywood ----------- $6 (Ace Hardware)
Weldbond glue --------------------- $3 (Micheals)
D Rings ------------------------------$2.50 (Home Depot)
Heavy Gauge wire (already had) 
                                   
Total --------------------------------- $31 

It helped that I already had some of the supplies, but I would say starting from scratch, it could be done for under $50 easily, with supplies left over to make another!

This mirror looks high end for the price (at least I think so :), so be on the hunt for a chandelier with a massive glass shell!

--

Update: After hearing from a few people that the glass panes were difficult to remove from the fixture I wanted to mention that our frame was pretty loose and fairly bendable. I have seen ones that are very tight around the glass, so if you would like to try this, I would definitely recommend looking for one that is looser around the glass panes :)



Creating with the Stars
Read More..